POWER TURRET CNC LATHE

PT52S

The PT52S is a CNC lathe equipped with a 12-station power turret. The Y-axis is designed with Wedge type, which has the advantage of high rigidity. The machine uses the latest SYNTEC control system, which is easy to operate and guarantees long and stable operation.

Techical Data

CAPACITY

Swing Over Cross Bed

Φ350mm

Max. Length of Workpiece

350mm

Turning Diameter

Bar Materials up to Φ51mm

Single Workpiece up to Φ350mm

Bed Type

30° Slant Bed

SPINDLE

Spindle Nose Taper

A2-6

Speed

3500 RPM

Spindle Motor Power

11 kW Servo Motor

18.5 kW Servo Drive

Clamp

8" 3-Jaw Hydraulic Chuck

Spindle bore

Φ62mm

TRAVELS

Z Axis

350mm

X Axis

220mm

Y Axis

±40mm

Guideway Type

40mm THK/NSK ball screw rod

45mm THK/INA linear guideway

Z/X Axis

Up to 20m/min

Y Axis

Up to 10m/min

Machining Accuracy

±0.0025mm

Surface roughness

≤Ra 1.6μm

TOOLS

Power Turret

BMT55 12 stations

Tool holder

Inner Hole Tool Holders (4 Sets)

Outer Circular Tool Holders (3 Sets)

Facing Tool Holder (1 Set)

Side Milling Tool Holders (2 Sets)

Face Milling Tool Holders (2 Sets)

Tailstock

Tailstock Type

MT5

Tailstock Travel

400mm

Motor & Servo

Z&X&Y Axis

1.8 kW Servo Motor

2.0 kW Servo Drive

CNC CONTROL

Controller

SYNTEC

POWER SUPPLY

Total Power

20KW

Voltage

380VAC 50Hz

DIMENSIONS

Dimensions (L/W/H)

3355mm*1920mm*2156 mm

Weight

4400 kg
Features

  • The patented slant bed design increases the X-axis travel to 220mm, Y-axis travel to 40mm and Z-axis to 350mm reducing the lathe size and stability.

  • Equipped with a BMT55 12-station power turret, a power milling head can be installed at the upper or bottom position of the Y-axis (turret), high rigidity cutting, suitable for long-axis turning, milling, Processing of complex multi-process products such as drilling and tapping.

  • The main spindle is with C-axis Simultaneous machining function, high speed, high precision, and low vibration which can make the workpiece precise. Each spindle bearing assembly was tested for dynamic balance before installation to ensure high-speed running stability.

  • MT5 Hydraulic Tailstock, automatically detects pressure and locks, providing better conditions for processing slender parts.

  • Equips with 40mm ball screw rod rail and 45mm linear guideway to provide precision and low vibration tool carriage movement.

  • Equips with auto lubrication system to ensure transmission system smoothly and long-lived.

  • 11KW Servo Spindle, 3500rpm High-speed rotation and precision control.

  • SYNTEC CNC system co-works with quality electrical parts providing a rapid-operation and durable use.
Optional
Oil Bar Feeder
Servo Bar Feeder
Chain Chip Conveyor
Part Catcher
Side Milling Tool Holder
Face Milling Tool Holder
Oil Mist Collector
Automated Tool Binding
Fanuc CNC Syetem

Application

Competent to handle the turning process with brass, bronze, aluminum, steel, stainless steel, and rigid plastic with bars diameter up to Φ51 mm or single workpieces up to Φ350mm. High Rigidity casting iron body provides the possibility of higher hardness materials and better smoothness (smaller roughness). PT52S is equipped with a CNC program-controlled hydraulic tailstock, a 12-station power turret, a power milling head that can be installed at the upper or bottom position of the Y-axis (turret), high rigidity cutting, suitable for long-axis turning, milling, Processing of complex multi-process products such as drilling and tapping.

Related Products