POWER TURRET CNC LATHE

PT52W

The PT52W is a CNC lathe equipped with a 12-station power turret. The Y-axis is designed with Wedge type, which has the advantage of high rigidity. The machine uses the latest SYNTEC control system, which is easy to operate and guarantees long and stable operation.

Techical Data

CAPACITY

Swing Over Cross Bed

Φ700mm

Turning Length

550mm

Turning Diameter

Bar Materials up to Φ51mm

Single Workpiece up to Φ350mm

Bed Type

30° Slant Bed

TRAVELS

Z Axis

550mm

X Axis

200mm

Y Axis

±45mm

Guideway Type

32mm THK/NSK ball screw rod

35mm THK/INA linear guideway

Z/X Axis

Up to 25m/min

Machining Accuracy

±0.0025mm

Surface roughness

≤Ra 1.6μm

SPINDLE

Spindle Nose Taper

A2-6

Speed

3500 RPM

Spindle Motor Power

11 kW Servo Motor

15 kW Servo Drive

Clamp

8 inch 3-Jaw Hydraulic Chuck

Spindle bore

Φ62mm

TOOLS

Power Turret

BMT55 12 stations

Tool holder

Inner Hole Tool Holders (4 Sets)

Outer Circular Tool Holders (3 Sets)

Facing Tool Holder (1 Set)

Side Milling Tool Holders (2 Sets)

Face Milling Tool Holders (2 Sets)

Tailstock

Tailstock Type

MT5

Tailstock Travel

500mm

Motor & Servo

Z&X&Y Axis

1.8 kW Servo Motor

2.0 kW Servo Drive

CNC CONTROL

Controller

SYNTEC

POWER SUPPLY

Total Power

20KW

Voltage

380VAC 50Hz

DIMENSIONS

Dimensions (L/W/H)

3030mm*2018mm*2032mm

Weight

4600 kg
Features

  • The patented slant bed design increases the X-axis travel to 200mm, Y-axis travel to 45mm and Z-axis to 550mm reducing the lathe size and stability.

  • Equipped with a BMT55 12-station power turret, a power milling head can be installed at the upper or bottom position of the Y-axis (turret), high rigidity cutting, suitable for long-axis turning, milling, Processing of complex multi-process products such as drilling and tapping.

  • The main spindle is with C-axis Simultaneous machining function, high speed, high precision, and low vibration which can make the workpiece precise. Each spindle bearing assembly was tested for dynamic balance before installation to ensure high-speed running stability.

  • MT5 Hydraulic Tailstock, automatically detects pressure and locks, providing better conditions for processing slender parts.

  • Equips with 32mm ball screw rod rail and 35mm linear guideway to provide precision and low vibration tool carriage movement.

  • Equips with auto lubrication system to ensure transmission system smoothly and long-lived.

  • SYNTEC CNC system co-works with quality electrical parts providing a rapid-operation and durable use.
Optional
Oil Bar Feeder
Servo Bar Feeder
Chain Chip Conveyor
Part Catcher
Side Milling Tool Holder
Face Milling Tool Holder
Oil Mist Collector
Automated Tool Binding
Fanuc CNC Syetem

Application

Competent to handle the turning process with brass, bronze, aluminum, steel, stainless steel, and rigid plastic with bars diameter up to Φ51 mm or single workpieces up to Φ350mm. High Rigidity casting iron body provides the possibility of higher hardness materials and better smoothness (smaller roughness).

Case Study

Configuration: PT52W equipped with Power Turret, 3-Jaw Hydraulic Chuck.

Workpiece: 500mm Length Demo Shaft, 304 Stainless Steel

Machining Process: Turning, Milling.

Turning Duration: 20 minutes of turning, milling takes about 8 hours.

Features: 304 stainless steel is very hard, resulting in high cutting heat and only 0.5mm per milling, resulting in a lot of time spent on milling.

Related Products